First, try jumping it at your battery, If this works, you need a battery charge. If not start by examining the fat wires and ends, from the battery to the starter relay, relay to starter, starter to frame (some models) and frame to neg of battery. If the cables are OK and ends are tight to cable and tight to connector, and clean at connectors, you still may need battery or charge. Also check starter relay.

Typically this means that the battery is flat.

It probably needs replacing the brushes could be going bad

solenoid

Weak battery or poor connection on the cables.

Hi, low charge or bad battery, bad cable connection at the battery (these connection need to be shiny clean between the battery post and the inside of the cable end.. you can get a cheap wire post cleaner at any parts store..

good luck

tim

so many tinggs

Okay so my starter clicks pretty loud when I turn the key but that's all it does. But when I hook jumper cables up and touch them right to the starter it works. What could that be