Check your craigslist, or local body shops.
No need to replace door over a medium sized dent if it still functions properly.
It is generally fairly easy to remove dents in a door unless the edge is dented, or it has a compound curve damaged. If you disassemble the door, you can pound out the dent using a backstop, like a block on the other side. If the metal is bent in (deformed), it can be re-formed with a propane torch and a hammer, and some careful touch-ups.
Paint shouldn't be a big deal. If you want someone else to fix it, you're looking at $1250 at the minimum.
No one can tell you what the price would be or what the cheapest way to fix it would be without actually seeing the damage ( and it has to be seen in person, not just a picture of the damage ).
Bring the vehicle to 2 or 3 body shops and get a quote for the repair. This is the only way of getting an accurate assessment of the damage and a price range for the repair.
if the dent isnt creased then you can pull the dent out with a slide hammer. even if their is a small corner crease with a bit of filler and sanding it may be minimal. If you are lucky call around to salvage yards and look for a car that has a intact door of the same model and color.. either way your looking at least a few hundred..
So I crashed my 2000 infinity and there is a medium sized dent on the drivers side door. It's decent sized and not to deep but the pain was also scratched off. Anyways I was wondering what Tue cheapest way to fix it up would he. Thanks!
