You need a dedicated break in oil.
Quadrajet needs to be set up with the right bleeds and jet/metering rod combo or it won't perform.
Why aren't you putting a good solid lifter cam in there..? I would also be putting Vortec heads on there, as well. A 270 cam with say a 110 lobe separation angle is going to be a lazy pig/accelerator. in a 327 without either a power adder or a lot of compression.
camshaftshaun@gmail.com
For break in at least, for the cam, use a diesel oil, Rotella 10W30 should be perfect. I would just keep using the Rotella. No other carburetor will ever be as good as a well tuned Quadrajet, it was the last word in carburetors.
thank you guys . i will use like penzoil
Hi, a 650 cfm carb should work fine..
oil any high quality
good luck
tim