did not have any tans fluid loss it was swapped out with the deal that holds the trans and motor in place i belive it is called a horse ? trans fluid level is good and look good too

Well, it would appear that the condition may be related to the work done, maybe not...

I would start by checking the fluid level, checking for any trans related codes and carefully rechecking all areas and components that were involved in the repair process.

After that, if you are still having trouble, report the findings back here and let's go from there.

well did you refill the fluid. check it refill and try it. also when you changed the frame was the engine properly held in place. check wiring harness at the transmission. any check engine light on a code might also lead you in a direction. find local shop at ATRA.COM for more info

Check that axle you replaced to confirm it is seated properly in the transaxle.

it has the 4.0 we switched out the sub frame and pass side axle after that drove about 20 miles and it started messing up acting like it would not go into gear pulled over and turn it off and restarted the car and it would work took several restarts to get it home next day it will not go into gear at all what could it be also it worked fine prior to repairs